國家衛生研究院 NHRI:Item 3990099045/4834
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 12145/12927 (94%)
造访人次 : 857784      在线人数 : 817
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻
    主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于NHRI ‧ 管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.nhri.org.tw/handle/3990099045/4834


    题名: Cavitation phenomena in mechanical heart valves: Studied by using a physical impinging rod system
    作者: Lo, CW;Chen, SF;Li, CP;Lu, PC
    贡献者: National Institute of Cancer Research;Division of Medical Engineering Research
    摘要: When studying mechanical heart valve cavitation, a physical model allows direct flow field and pressure measurements that are difficult to perform with actual valves, as well as separate testing of water hammer and squeeze flow effects. Movable rods of 5 and 10?mm diameter impinged same-sized stationary rods to simulate squeeze flow. A 24?mm piston within a tube simulated water hammer. Adding a 5?mm stationary rod within the tube generated both effects simultaneously. Charged-coupled device (CCD) laser displacement sensors, strobe lighting technique, laser Doppler velocimetry (LDV), particle image velocimetry (PIV) and high fidelity piezoelectric pressure transducers measured impact velocities, cavitation images, squeeze flow velocities, vortices, and pressure changes at impact, respectively. The movable rods created cavitation at critical impact velocities of 1.6 and 1.2?m/s; squeeze flow velocities were 2.8 and 4.64?m/s. The isolated water hammer created cavitation at 1.3?m/s piston speed. The combined piston and stationary rod created cavitation at an impact speed of 0.9?m/s and squeeze flow of 3.2?m/s. These results show squeeze flow alone caused cavitation, notably at lower impact velocity as contact area increased. Water hammer alone also caused cavitation with faster displacement. Both effects together were additive. The pressure change at the vortex center was only 150?mmHg, which cannot generate the magnitude of pressure drop required for cavitation bubble formation. Cavitation occurred at 3-5?m/s squeeze flow, significantly different from the 14?m/s derived by Bernoulli's equation; the temporal acceleration of unsteady flow requires further study.
    日期: 2010-10
    關聯: Annals of Biomedical Engineering. 2010 Oct;38(10):3162-3172.
    Link to: http://dx.doi.org/10.1007/s10439-010-0070-y
    JIF/Ranking 2023: http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=NHRI&SrcApp=NHRI_IR&KeyISSN=0090-6964&DestApp=IC2JCR
    Cited Times(WOS): https://www.webofscience.com/wos/woscc/full-record/WOS:000281895500011
    Cited Times(Scopus): http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=77956719072
    显示于类别:[其他] 期刊論文
    [其他] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    SCP77952296870.pdf1015KbAdobe PDF350检视/开启


    在NHRI中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈