國家衛生研究院 NHRI:Item 3990099045/15641
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 12145/12927 (94%)
造訪人次 : 854812      線上人數 : 834
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於NHRI ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: http://ir.nhri.org.tw/handle/3990099045/15641


    題名: Nitrogen and sulfur doped carbon dots coupled cellulose nanofibers: A surface functionalized nanocellulose membranes for air filtration
    作者: Khan, MJ;Karim, Z;Pongchaikul, P;Posoknistakul, P;Intra, P;Laosiripojana, N;Wu, KCW;Sakdaronnarong, C
    貢獻者: Institute of Biomedical Engineering and Nanomedicine
    摘要: Background: The current study demonstrates a process to produce a hybrid bio-organic cellulose nanofiber (CNF) membrane with high filtration performance and mechanical strength. This was accomplished by 1) tailoring the functional groups of CNFs, notably using the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical oxidation and 2) coupling them with carbon dots (CDs). Methods: The surface chemistry of CNF was modified through TEMPO oxidation. Subsequently, a coupling reaction was conducted with CDs synthesized hydrothermally, as well as synthesized N/S-CDs derived from palm bunch. The impact of these modifications on the formation of air filters was investigated. Modification and coupling of surface modified CNF were evaluated by advanced analytical techniques. The toxicity of pristine and N/S-CDs coupled cellulose nanofibers was studied by cytotoxicity assay. Vacuum filtration and sequential compression molding techniques were applied to fabricate CNF filters, and the particle filtration efficiency of different filters was determined. Significant findings: The coupling of N/S-CDs to CNF significantly enhanced the tensile strength of the membranes. Coupling of N/S-CDs to TEMPO[sbnd]CNF membrane showed the highest tensile strength (9.3 ± 1.9 MPa), while N/S-CDs coupling to CNF membrane exhibited slightly lower tensile strength (9.0 ± 1.3 MPa). The average pore diameter of the filters was slightly reduced after the CNF surface modification, which led to higher differential pressure across the filters. Both the pristine and TEMPO-modified CNF filters displayed high filtration efficiency for 0.3 μm-aerosol particles (∼70–81 %) and 0.1 μm-aerosol model particles (∼50–68 %), which was in a range of bacteria and viruses. This study provided detailed information about the fabrication of modified CNF filters with high air filtration efficiency for micro/nano-sized particles using cost-effective biodegradable raw materials.
    日期: 2024-07
    關聯: Journal of the Taiwan Institute of Chemical Engineers. 2024 Jul;160:Article number 105324.
    Link to: http://dx.doi.org/10.1016/j.jtice.2023.105324
    JIF/Ranking 2023: http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=NHRI&SrcApp=NHRI_IR&KeyISSN=1876-1070&DestApp=IC2JCR
    Cited Times(WOS): https://www.webofscience.com/wos/woscc/full-record/WOS:001256574200001
    Cited Times(Scopus): https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=85182444674
    顯示於類別:[吳嘉文] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    SCP85182444674.pdf13191KbAdobe PDF128檢視/開啟


    在NHRI中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋