 |
English
|
正體中文
|
简体中文
|
Items with full text/Total items : 12145/12927 (94%)
Visitors : 861451
Online Users : 461
|
|
|
Loading...
|
Please use this identifier to cite or link to this item:
http://ir.nhri.org.tw/handle/3990099045/12273
|
| Title: | Abutment screw withdrawal after conical abutment settlement: A pilot study |
| Authors: | Yao, KT;Chang, TY;Fang, HW;Huang, CH;Wang, DH;Hsu, ML |
| Contributors: | Institute of Biomedical Engineering and Nanomedicine |
| Abstract: | OBJECTIVE: This study investigated the effects of abutment screw withdrawal after conical abutment settlement on the stability of the implant-abutment connection. MATERIAL AND METHODS: Twenty implants of a conical connection system were used. Two two-piece abutment designs were used: cone only (n = 10; NI) and cone plus octagonal index design (n = 10; I); for each design, five samples were used with (S) and without (NS) abutment screw withdrawal before a cyclic test. Finally, four groups, namely Gr S(NI), Gr S(I), Gr NS(NI), and Gr NS(I), were included. The cyclic test included cyclic loading of 20-200 N, 30 degrees , and 4-mm off-axis to implant axis at 10 Hz for 10(6) cycles, simulating a clinical time interval of 40 months. The fatigue cycles were recorded. The axial displacement of the conical abutments during abutment settlement, screw withdrawal, and cyclic loading were measured. Abutment morphology was examined through scanning electron microscopy (SEM). RESULTS: Only Gr NS(NI) failed the test, indicating that without the index design and abutment screw withdrawal, connection stability seriously deteriorated. Gr NS(I) exhibited significantly higher axial displacement into the implant after abutment settlement than did Gr NS(NI). It also exhibited continuous axial displacement into the implant after cyclic loading. SEM after cyclic testing in Gr NS(I) revealed marked burnishing on lateral edges of the index, indicating that the index design provides an antitorsional ability. CONCLUSION: Although this study has few limitations, abutment screw withdrawal is feasible in this conical implant-abutment connection system with index design. |
| Date: | 2020-02 |
| Relation: | Clinical Oral Implants Research. 2020 Feb;31(2):144-152. |
| Link to: | http://dx.doi.org/10.1111/clr.13550 |
| JIF/Ranking 2023: | http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=NHRI&SrcApp=NHRI_IR&KeyISSN=0905-7161&DestApp=IC2JCR |
| Cited Times(WOS): | https://www.webofscience.com/wos/woscc/full-record/WOS:000497477400001 |
| Cited Times(Scopus): | https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=85075330860 |
| Appears in Collections: | [其他] 期刊論文
|
Files in This Item:
| File |
Size | Format | |
|---|
| PUB31647133.pdf | 23424Kb | Adobe PDF | 444 | View/Open |
|
All items in NHRI are protected by copyright, with all rights reserved.
|
